FLIP Automatic Page Turner

Frequently Asked Questions

The page turner is a fabulous type of assistive technology. It can bring the whole world of reading to people who may not be able to read otherwise.

Will it work in your environment? Want to check whether it can handle the books and magazines that you normally use?

To prepare for your purchase, you can confirm the space you need for setup in your location by reviewing the page turner specifications below.

You'll find that it's compact size make it an ideal solution for many cramped locations.

That and many more answers are below. If you have any other questions, please contact us.

What types of publications can I use with this assistive device?

It's very flexible! You can use it to read hardcover books, paperback and your favorite magazines.

What size of books and magazines can the FLIP turner help me read?

The page turner can handle most books or magazines - with a minimum size of about 4x6 inches, and a maximum size of about 8x11.5 inches, and a thickness of about an inch.

Exact specifications are:Supported Book Size Max: 8.27 x 11.69 in. (210 x 297 mm) Supported Book SizeMin: 4.13 x 5.83 in. (105 x 148 mm)Supported Book Thickness: Max: 1.18 in. (30 mm)

Can I use a switch to use this assistive device?

Yes! In fact, when you purchase a FLIP automatic page turner, you will also receive one Jelly Bean switch to help get you started.

You'll be able to access the controls with single-switch automatic scanning or two-switch direct selection, or just press a button. It's up to you.

How long does it take to set up a book?

On average, you'll be able to add a book or magazine in about two minutes. From there, you'll be able to turn pages in about eight seconds.

How well does it really work?

The FLIP automatic page turner has been extensively tested. Average results are excellent - 96% accuracy in page turning.

How much space do I need for the unit and stand?

You'll be pleased to know that this assistive technology is designed to be desktop friendly.

The unit size is only 23.62 (W) x 18.90 (H) x 11.02 (D) inches. (600 x 480 x 280 mm)

There is also a support stand, that is 24.02 (W) x 9.65 (D) in. (610 x 245 mm)

As you can see, it will fit very well in most spaces.

How much does it weigh?

Don't worry, you wont' need to get a concrete reinforced desk! :-) The unit only weighs about 19 lbs (8.5 kg).

Even lighter than the sack of potatoes you bring home from the grocery store...

How does it connect with the switch(es)?

The connection uses a 3.5 mm phone plug. And, not to worry, the jacks for connection are provided for you too.

Note: Be sure the output plug of external switch is a 3.5 mm phone plug.

What are the power requirements?

This assistive device was designed to work in a typical North-American environment. But, if your electrician is asking, it uses:

AC 100 V, single-phase, 50/60 HzMaximum input capacity 30 W

Visit our other special needs sites

TheSpecialLife.com	teaching-special-needs-students.com	special-need-child-Canada.com